Integrated Mechanical Design | GD&T | Tolerance Stack-Up | NPD Project Internship

Integrated Mechanical Design | GD&T | Tolerance Stack-Up | NPD Project Internship

Duration: 8 Weeks

Total Duration: 160 Hours

Structure: 6 Weeks Classes + 2 Weeks Project Preparation

Format: Instructor-Led | Practical Exercises | Engineering Case Studies | Design Activities | Final Industry Project

ABOUT THE INTERNSHIP

This 8-Week Industry-Oriented Mechanical Design & NPD Internship is designed to provide participants with practical exposure to the core engineering activities involved in mechanical product development.

The internship combines three essential areas:

01 — NPD & Mechanical Product Design

Understanding how a product moves from requirement to design release.

02 — GD&T

Understanding how engineering drawings communicate functional geometry, datums and geometric requirements.

03 — Tolerance Stack-Up

Understanding how dimensional and geometric variation affects assembly and product performance.

The first 6 weeks focus on structured technical learning and hands-on engineering exercises.

The final 2 weeks are dedicated to an industry-oriented capstone project, where participants apply the concepts learned throughout the internship to develop and document a mechanical product.

    INTERNSHIP OBJECTIVES

    By the end of the internship, participants will be able to:

    • Understand the complete NPD lifecycle
    • Convert customer requirements into engineering requirements
    • Develop mechanical product concepts
    • Perform basic mechanical design activities
    • Apply DFM and DFA principles
    • Read and interpret engineering drawings
    • Apply GD&T concepts
    • Establish Datum Reference Frames
    • Interpret Feature Control Frames
    • Apply MMC, LMC and RFS concepts
    • Perform tolerance stack-up analysis
    • Perform Worst Case analysis
    • Perform RSS/statistical analysis
    • Identify critical tolerance contributors
    • Perform tolerance allocation
    • Understand manufacturing variation and process capability
    • Identify design risks
    • Develop basic Design FMEA
    • Plan Design Verification activities
    • Prepare engineering documentation
    • Conduct a design review
    • Prepare a basic design release package
    • Work on a complete mechanical NPD project

    8-WEEK INTERNSHIP STRUCTURE

    WEEK 1 — NPD & PRODUCT DEVELOPMENT FUNDAMENTALS
    Module 1 — Introduction to NPD

    Introduction to NPD

    Topics

    • What is New Product Development?
    • Product development lifecycle
    • NPD phases
    • Role of the Mechanical Design Engineer
    • Customer requirements
    • Engineering requirements
    • Design inputs
    • Design outputs
    • Product specifications
    • Functional requirements
    • Performance requirements
    • Critical characteristics
    • Design reviews
    • Engineering gates

    Practical Activities

    • Analyze a product requirement
    • Identify engineering requirements
    • Define measurable product specifications
    • Identify critical characteristics

    Requirements & Concept Development

    Topics

    • Voice of Customer
    • Requirement conversion
    • Functional decomposition
    • Product architecture
    • Concept generation
    • Concept screening
    • Concept evaluation
    • Engineering trade-offs
    • Decision matrix
    • Concept selection

    Practical Activity

    Generate and select a mechanical product concept based on defined requirements.

    Module 3 — Mechanical Product Design

    Mechanical Product Design

    Topics

    • Mechanical design process
    • Component design
    • Assembly design
    • Load paths
    • Mechanical interfaces
    • Fasteners
    • Shafts
    • Bearings
    • Brackets
    • Housings
    • Springs
    • Material selection
    • Design calculations
    • Strength and stiffness considerations
    • Design margins

    Practical Activity

    Develop a preliminary mechanical design based on product requirements.

    DFM & DFA

    Topics

    • Design for Manufacturing
    • Design for Assembly
    • Manufacturing process considerations
    • Machined components
    • Sheet-metal components
    • Cast components
    • Injection-molded components
    • Standard components
    • Part-count reduction
    • Assembly accessibility
    • Manufacturing tolerances
    • Cost considerations
    • Design simplification

    Practical Activity

    Review an assembly and identify opportunities for manufacturing and assembly improvement.

    Module 5 — GD&T Fundamentals & Drawing Interpretation

    GD&T Fundamentals & Drawing Interpretation

    Topics

    • Introduction to GD&T
    • Purpose of GD&T
    • Limitations of ± dimensioning
    • GD&T terminology
    • GD&T symbols
    • Feature
    • Feature of size
    • Datum feature
    • Basic dimension
    • Feature Control Frame
    • Tolerance zones
    • Engineering drawing interpretation

    Practical Activity

    Interpret GD&T requirements from engineering drawings.

     Form Controls

    Topics

    • Straightness
    • Flatness
    • Circularity
    • Cylindricity
    • Form tolerance zones
    • Functional applications
    • Size and form relationship

    Practical Activity

    Interpret form controls on shafts, holes and machined surfaces.

    Datums & Datum Reference Frames

    Topics

    • Datum features
    • Datum simulators
    • Primary datum
    • Secondary datum
    • Tertiary datum
    • Datum Reference Frame
    • Degrees of freedom
    • 3-2-1 constraint concept
    • Datum sequence
    • Functional datum selection

    Practical Activity

    Establish a Datum Reference Frame for a mechanical component.

    Module 8 — Orientation Controls

    Orientation Controls

    Topics

    • Parallelism
    • Perpendicularity
    • Angularity
    • Orientation tolerance zones
    • Datum references
    • Functional applications
    • Form vs orientation

    Practical Activity

    Analyze orientation requirements for surfaces, holes and shafts.

     Position & Material Conditions

    Topics

    • Position tolerance
    • True position
    • Basic dimensions
    • Hole location
    • Pin location
    • Pattern location
    • RFS
    • MMC
    • LMC
    • Bonus tolerance
    • Virtual condition
    • Functional gaging concepts

    Practical Activity

    Analyze a hole-pattern drawing and calculate allowable positional variation.

    Profile & Advanced GD&T

    Topics

    • Profile of a line
    • Profile of a surface
    • Profile tolerance zones
    • Profile with datum references
    • Composite controls
    • Feature patterns
    • Datum shift
    • Circular runout
    • Total runout

    Practical Activity

    Analyze a complex mechanical drawing and interpret its complete GD&T requirements.

    Module 11 — Tolerance Stack-Up Fundamentals

    Tolerance Stack-Up Fundamentals

    Topics

    • Purpose of tolerance stack-up
    • Functional requirements
    • Critical characteristics
    • Tolerance contributors
    • Tolerance chains
    • Gap
    • Clearance
    • Flushness
    • Interference
    • Stack-up direction
    • Tolerance loops
    • Stack-up equations

    Practical Activity

    Build a tolerance loop from a mechanical assembly.

    1D Tolerance Stack-Up

    Topics

    • Bilateral tolerances
    • Unilateral tolerances
    • Limit dimensions
    • Positive and negative contributors
    • Maximum and minimum conditions
    • 1D stack-up methodology

    Practical Activity

    Perform a complete 1D tolerance stack-up.

    Worst Case Analysis

    Topics

    • Worst Case methodology
    • Maximum condition
    • Minimum condition
    • Arithmetic stack-up
    • Maximum gap
    • Minimum gap
    • Maximum interference
    • Assembly acceptance criteria

    Practical Activity

    Determine whether an assembly satisfies its functional requirement under Worst Case conditions.

    Module 14 — RSS & Statistical Stack-Up

    RSS & Statistical Stack-Up

    Topics

    • Worst Case vs statistical analysis
    • Random variation
    • Normal distribution
    • Mean
    • Standard deviation
    • Variance
    • RSS methodology
    • 3σ, 4σ, 5σ and 6σ
    • Statistical assembly variation
    • Yield

    Practical Activity

    Perform an RSS analysis and compare it with the Worst Case result.

     Manufacturing Variation & Process Capability

    Topics

    • Design tolerance vs manufacturing variation
    • Process variation
    • Mean shift
    • USL and LSL
    • Cp
    • Cpk
    • Pp
    • Ppk
    • Process capability
    • Assembly yield

    Practical Activity

    Evaluate manufacturing variation and its impact on assembly performance.

    Tolerance Allocation & Optimization

    Topics

    • Tolerance allocation
    • Critical contributors
    • Sensitivity
    • Dominant contributors
    • Tightening vs relaxing tolerances
    • Manufacturing capability
    • Cost vs tolerance
    • Functional dimensioning
    • Design robustness
    • Tolerance optimization

    Practical Activity

    Optimize tolerances while maintaining the functional requirement.

     Design Risk & Engineering Review

    Topics

    • Design risk
    • Design FMEA concepts
    • Failure modes
    • Causes and effects
    • Risk identification
    • Design mitigation
    • Design review
    • Engineering documentation
    • Design changes
    • Design release

    Practical Activity

    Review a mechanical design and identify design risks and improvement opportunities.

    CAPSTONE PROJECT PREPARATION

    Project Phase 1 — Requirement & Concept

    Participants will begin their individual/team NPD project.

    Activities

    Define the product problem

    ↓

    Identify customer/user requirements

    ↓

    Define engineering requirements

    ↓

    Develop product specifications

    ↓

    Perform functional decomposition

    ↓

    Generate design concepts

    ↓

    Evaluate concepts

    ↓

    Select final concept

    Project Deliverables

    • Problem statement
    • Customer requirements
    • Engineering requirements
    • Product specifications
    • Functional requirements
    • Concept sketches
    • Concept selection matrix
    • Selected concept

    CAPSTONE PROJECT COMPLETION & PRESENTATION

    Project Phase 2 — Engineering Design & Documentation

    Participants will develop the selected concept into an engineering-level mechanical product design.

    Activities

    Mechanical Design

    ↓

    Material Selection

    ↓

    DFM / DFA Review

    ↓

    GD&T Definition

    ↓

    Tolerance Stack-Up

    ↓

    Design Risk Analysis

    ↓

    Design Verification Planning

    ↓

    Engineering Documentation

    ↓

    Design Review

    ↓

    Final Project Presentation

    CAPSTONE PROJECT DELIVERABLES

    Each participant/team will prepare:

    Product Requirement Document
    • Problem statement
    • Customer requirements
    • Engineering requirements
    • Product specifications

     

    •  Functional decomposition
    • Multiple concepts
    • Concepts evaluation
    • Final concept selection

     

    • Product architecture
    • Component design
    • Assembly concept
    • Material selection
    • Design calculations
    • Component drawing
    • Assembly drawing
    • Dimensions
    • Tolerances
    • GD&T
    • Datum scheme

     

    • Functional requirement
    • Tolerance loop
    • Contributors
    • Worst Case analysis
    • RSS/statistical analysis
    • Critical contributor identification
    • Tolerance allocation

     

    • Failure modes
    • Design risks
    • Risk mitigation actions

     

    • Requirement
    • Verification method
    • Acceptance criteria

     

    Participants will present:

    • Product requirement
    • Design concept
    • Mechanical design
    • GD&T strategy
    • Tolerance analysis
    • Design risks
    • Verification approach
    • Final engineering recommendations

     

    COMPLETE INTERNSHIP LEARNING PATH

    PHASE 1 — UNDERSTAND

    NPD Fundamentals

    → Requirements

    → Specifications

    → Concept Development

    PHASE 2 — DESIGN

    Mechanical Product Design

    → Material Selection

    → DFM / DFA

    PHASE 3 — DEFINE

    GD&T

    → Datums

    → Feature Controls

    → Functional Requirements

     PHASE 4 — ANALYZE

    Tolerance Stack-Up

    → Worst Case

    → RSS

    → Statistical Analysis

    → Tolerance Allocation

    PHASE 5 — DEVELOP

    Capstone Project

    → Product Concept

    → Mechanical Design

    → GD&T

    → Tolerance Analysis

    PHASE 6 — PRESENT

    Design Review

    → Engineering Documentation

    → Design Verification Plan

    → Final Presentation

    SKILLS YOU WILL DEVELOP

    By completing this internship, you will gain practical exposure to:

    • New Product Development
    • Mechanical Product Design
    • Engineering Drawing
    • GD&T
    • Datum Reference Frames
    • Tolerance Stack-Up
    • Worst Case Analysis
    • RSS / Statistical Analysis
    • Tolerance Allocation
    • DFM / DFA
    • Design Risk Analysis
    • Design FMEA
    • Design Verification
    • Engineering Documentation
    • Design Reviews
    • Design Release

    FINAL INTERNSHIP OUTCOME

    The internship follows a complete industry-oriented product development journey:

    Customer Requirement

    Engineering Requirement

    Product Specification

    Concept Development

    Concept Selection

    Mechanical Product Design

    DFM / DFA

    Engineering Drawing

    GD&T

    Tolerance Stack-Up

    Design Risk Analysis

    Design Verification

    Design Review

    Final Design Documentation

    Who Should Attend?

    This internship is suitable for:

    Mechanical Engineering Students | Mechanical Design Engineers | CAD Engineers | Product Development Engineers | NPD Engineers | Manufacturing Engineers | Quality Engineers | Engineering Professionals

    Prerequisites

    Basic understanding of:

    • Engineering drawing
    • Basic mechanical design
    • Mechanical components
    • Basic manufacturing concepts

    Prior professional experience in NPD, GD&T or tolerance stack-up is not required.

    Frequently Asked Questions

    When does the internship start?

    The internship will start within 1–2 days after registration and completion of the onboarding process.

     

    Classes will be conducted Monday to Friday in the evening after 7:00 PM.

    The detailed schedule will be shared during the onboarding process.

     

    Yes. The entire internship and training program is conducted 100% online.

     

    The internship is an 8-week practical Product Design and Product Development program.

    The program includes technical training, practical engineering activities, project work, and a final technical report.

     

    Participants can use any suitable 3D CAD modelling software for the project activities.

    Participants may use a valid student, educational, or other legally licensed version of their preferred CAD software.

    The program is not limited to any particular CAD software. The primary focus is on engineering design knowledge and product development skills, rather than software-specific training.

     

    Yes. The programme is suitable for beginners. However, participants should be prepared to learn 3D modelling quickly, as the initial project activities involve creating and developing 3D designs. Participants who require additional support with 3D CAD learning and training opportunities can contact our team for further guidance.

     

     

    Yes.

    Participants who already have a suitable college project or previous design project can use their existing design for the practical engineering activities, subject to project suitability.

    The existing design can be further developed through activities such as:

    3D Design → Engineering Drawings → GD&T → Tolerance Analysis → DFMA → Design Improvement → Verification → Final Documentation

     

    No.

    The program focuses on Product Design and Product Development, not only CAD modelling.

    A Mechanical Design Engineer needs more than the ability to create 3D models. The program therefore covers engineering activities such as:

    – Engineering Drawing Interpretation
    – GD&T / GPS
    – Datum Selection
    – Tolerance Specification
    – Tolerance Stack-Up Analysis
    – DFMA
    – Design Optimization
    – Manufacturing Considerations
    – Design Verification
    – Engineering Documentation
    – Product Development

     

    Participants will work on a practical engineering project throughout the program.

    The activities may include:

    – Requirement understanding
    – Product concept development
    – 3D design development
    – Engineering drawing preparation
    – GD&T / GPS application
    – Tolerance analysis
    – Tolerance Stack-Up Analysis
    – DFMA
    – Design optimization
    – Manufacturing feasibility
    – Design verification
    – Technical documentation
    – Final engineering report

     

    Yes. The programme is project-oriented, and participants will work on a structured, practical engineering project.

    If the project is assigned by Voxel Hyperforge, it will be based on an industrial product or engineering application. Alternatively, participants may propose their own college projects, subject to the mentor’s approval.

    The objective is to provide practical experience in applying engineering concepts to product design and help participants confidently explain their design approach and engineering decisions during technical interviews.

     

    The program is designed to strengthen practical engineering knowledge and project experience.

    Participants will be expected to understand and explain their:

    – Design decisions
    – GD&T application
    – Tolerance calculations
    – Manufacturing considerations
    – DFMA decisions
    – Design verification approach
    – Product development methodology

    This will help participants approach Mechanical Design, Product Design, and Product Development interviews with greater confidence.

     

    Yes.

    During Week 8, participants will prepare and submit a detailed engineering report covering their project and the engineering activities performed during the program.

     

    By completing the program, participants can develop practical experience in:

    – Product Design
    – Product Development
    – GD&T / GPS
    – Tolerance Engineering
    – Tolerance Stack-Up Analysis
    – DFMA
    – Design Verification
    – Engineering Documentation
    – Manufacturing Considerations
    – Technical Communication

    The program is designed to help participants build a stronger engineering profile beyond basic CAD modelling.

     

    Yes.

    An internship certificate will be provided at the end of the 8th week, after the participant successfully completes the required training activities, project work, and final report.

     

    The program is suitable for:

    – Mechanical Engineering students
    – Recent Mechanical Engineering graduates
    – Junior Mechanical Design Engineers
    – CAD Engineers
    – Product Design aspirants
    – Product Development aspirants
    – Professionals transitioning into Mechanical Design
    – Participants looking for practical engineering project experience

    Students from other engineering and technical disciplines, including Electrical Engineering, Biomedical Engineering, Mechatronics and related fields, are also welcome to apply, provided they have an interest in mechanical design and product development.

     

    No.

    Professional industry experience is not mandatory.

    The program is structured to accommodate students and beginners while progressively introducing practical engineering concepts.

    Participants should be willing to learn, practise, and complete the assigned project activities consistently.

     

    The objective is to help participants develop from basic CAD modelling capability toward complete Product Design and Product Development capability.

    The program follows an engineering-oriented workflow:

    Requirements → Design → 3D Modelling → Engineering Drawings → GD&T → Tolerance Analysis → DFMA → Design Verification → Documentation

    The goal is to help participants understand not only how to create a model, but also how to engineer, evaluate, improve, verify, and communicate a product design.

     

     

    This is a fee-based internship programme. Participants are required to pay the applicable programme fee to enrol. No salary or stipend is provided during the internship.

     

    The fee covers structured technical training, guided practical exercises, engineering project activities, mentorship and project evaluation throughout the programme.

     

    No. This programme does not offer a stipend, salary or financial remuneration. Its primary focus is technical learning, practical engineering exposure and project development.

     

    Yes. Participants may propose their own product design ideas. The proposed project will be reviewed by the mentor to ensure that it aligns with the programme objectives and technical requirements. If approved, participants can proceed with their proposed projects under the mentor’s guidance.

     

    Projects may be undertaken individually or in teams, depending on the project scope and mentor’s guidance.

     

    Yes. Once the project is approved by the mentor, participants will receive technical guidance and feedback throughout the project development process to help improve their design approach and engineering decisions.

     

    Participants are expected to follow the project timeline and complete the assigned deliverables within the programme duration. They should communicate with their mentor if they encounter technical difficulties or delays.

     

    Yes. Undergraduate and postgraduate students from relevant engineering backgrounds can apply, provided they have the required basic technical knowledge and commitment to complete the programme. If unsure about your skill set feel free to email.

     

    Yes. The online evening schedule allows students and working professionals to participate alongside their existing academic or professional commitments. Participants should ensure they can dedicate sufficient time to practical activities and project work.

     

    No. Voxel Hyperforge does not guarantee employment or job placement. However, the programme is designed to strengthen participants’ technical knowledge, practical project experience and professional engineering profiles.

     

    Yes. Participants who successfully complete the programme can include their internship experience, acquired skills and completed project work in their resumes and professional profiles, subject to applicable confidentiality requirements.

     

    The programme fee is non-refundable. However, if a participant requests withdrawal within 3 days of payment, 30% of the amount paid may be refunded. No refund will be provided for withdrawal requests made after 3 days of payment.